Instek PPH-1503 Programmable High Precision DC Power Supply


Dual Range (0-15V/0-3A or 0-9/0-5A) High Resolution Fast Rec

SKU: Instek PPH-1503 Programmable High Precision DC Power Supply Category:

Instek PPH-1503 Programmable High Precision DC Power Supply
Dual Range Output (0~15V/ 0~3A or 0~9V / 0~5A); Output Power 45W
3.5 Inch TFT LCD Display
Constant Voltage and Constant Current operation
Built-in DVM measurement function
High Measurement Resolution (1mV/0.1mA for 5A Range); (1mV/0.1μA for 5mA Range)
Swift Responses with Accurate Measurement

PPH-1503 is a high-speed and high-precision DC Power Supply with dual range of 15V/3A or 9V/5A. PPH-1503 is exclusively designed to meet low power consumption requirements and users’ great demands of accuracy, speed and resolution of both voltage and current. Circuits are designed with swift response capability to provide a stable voltage output while experiencing load changes. For example, when switching cellular phone from standby to talk mode, the current consumption will be dramatically changed within milliseconds. When load current exceeded current limit, two operational modes: Limit and Trip can be selected. Under Limit mode, PPH-1503 will automatically switch to constant current (CC) mode. Under Trip mode, voltage output will automatically turn off.

PPH-1503 is designed to provide prompt response to the current change for recovering the output voltage at a minimum variation. The high sampling rate allows fast readback in voltage and current measurement to expedite products’ testing speed, which is able to increase the test throughput of production. Sink function can be used to test the battery charger of portable devices. The high precision performance of PPH-1503 provides the measurement capability in low power consumption level. One built-in DVM (Digital Volt-Meter) with input ports is designed to measure any point on DUT while PPH-1503 is outputting voltage and current. Besides, two ports are located on the front and rear panel which users can only select one to perform tests based upon their connection convenience. PPH-1503 is an ideal power source for production lines, R&D laboratories, device inspection, maintenance centers or facilities with the requirements of a swift and precise power supply with DVM.

Dual Range Operation

PPH-1503 operates as a generic power supply with the ability to display different current ranges from 3A range with 0-15.0V output to 5A range with 0-9.0V output totally for 45W output capacity.
Accurate Low Current Measurement

PPH-1503 provides 0.2% + 1μA readback accuracy and 0.1μA resolution for high precision of current measurement. For example, when portable device works in the sleep or standby mode, the current is drawn at a low level. The low current consumption under standby or sleep mode can be measured accurately
Fast Response to Load and Voltage Changes

When DUT such as cellular phone switches ti idling, receiving or transmitting mode, the current drawn from power supply changes over tenfold. The sudden current change will cause the supplied voltage to drop as well. The conventional power supply is considered a dull device since it will take several milliseconds for the dropped voltage to return to the original level. PPH-1503 is designed to simulate battery response when a significant voltage drop occurs. Recovery time of 40μS or less is guaranteed when the maximum voltage drop is within 100mV. Moreover, when users change the voltage level and conventional power supply does not have sufficient speed to reach the set level, PPH-1503 provides rise time of 0.15ms and fall time of 0.65ms, which are hundreds times faster than that of the conventional power supplies.
Measurements for Power Consumption Analysis

One particular requirement of power consumption for portable wireless communications devices is Pulse Current. Portable devices such as cellular phones must transmit and receive (detect) signal periodically by drawing pulse current instead of constant current from battery to ensure devices’ sound connection in network. TO analyze the transient power consumption of a DUT, the peak of short pulse current and average current measurements over a long period of time are crucial. PPH-1503 provides pulse current and long integration functions, the former can measure the peak value of a pulse, the latter can measure the average value of pulses. PPH-1503 provides DUT with pulse current measurement and analyzes the transient power consumption to qualify the device for specified power consumption requirements.
Panel Introduction
External Relay Control

PPH-1503 provides Limit relay and Trip relay modes and is equipped with corresponding output ports, in which output signals control external relay. Under Limit relay mode and the current limit is reached, PPH-1503 will switch from Constant Voltage to Constant Current automatically. Under “Trip relay” mode and the current limit is reached, PPH-1503 will turn output off. Furthermore, External Relay control can be used if users simultaneously use other devices for test system. When “Limit Relay” mode is selected and the current limit is reached, External Relay control signal will go high and will return back to the low level when the current level goes back below the constant current setting. When “Trip Relay” mode is selected and the current limit is reached, the relay control signal will go high and the output is disabled. When the output goes back on and the current is less than the current setting, the relay control signal will back to the low level. Users can use relay control signal to control other devices for test system.
Relay Can be Driven by Using Internal +5V or External Power Source:
+5VDC Relay Output
Using the +5VDC relay output to drive an external relay. Ensure the current does not exceed l50mA.
External Power Source
Using an external power source to drive the external relay. The voltage of the source can not exceed 15V and the current can not exceed l50mA.


There are no reviews yet.

Be the first to review “Instek PPH-1503 Programmable High Precision DC Power Supply”

Your email address will not be published. Required fields are marked *