HAL Series

Technical Specifications
Earth/Ground Bond Test – 104, LED, 103
Test Voltage 6V AC Nominal
Frequency 50Hz or 60Hz (Independent of supply)
Output Current Range 0.1A – 40.0A
Display Range 0 – 1500mΩ
AC Dielectric Strength Test – 104, LED, 103, 101
Programmable Voltage Range 0.10kV – 5.00kV
(10V/step manual) (50V/step auto)
Frequency Independent of Supply 0.01MΩ-500MΩ
Display Range (Current) 0.01mA – 20.00mA
Optional Arc Detection 9 Levels
Power and Leakage Test – 104 & LED
Power Output Rating
Test Voltage 110V – 230V AC (Mains Supply)
80V – 250V (Via Auxillary Input)
20A nominal (Vin-Vout)
Output Power Measurement – 104
Single Phase Power[br]Measurement Display Range 0.02kVA – 5.000kVA
Output Power Measurement – LED
Single Phase Power Measurement Display Range 000.0 – 999.9VA
Single Phase Power Factor Measurement
Display Range[br]*Please note: Displayed value is for indication only 0.000 – 1.000*
Leakage Current Measurement
Display Range 0.10mA – 20.00mA
Touch Current Measurement
Display Range Measuring Device 0.02mA – 5.00mA
IEC/EN 60990 Fig 4
(IEC/EN 60990 Fig 3 or Fig 5 Upon Request)
Power Requirement
Operating Voltage Selectable 115V or 230V AC RMS 50Hz / 60Hz
Insulation Resistance Test – 104, LED, 103, 101
DC Output Voltage 0.10kV – 6.00kV
(10V/step manual) (50V/step auto)
Display Range 0.03MΩ – 350MΩ
350MΩ – 500MΩ (Indication Only)
DC Dielectric Strength Test – 104, LED, 103, 101
Programmable Voltage Range Range 0.10kV – 6.00kV
(10V/step manual) (50V/step auto)
Display Range 0.01mA – 10.00mA
Optional Arc Detection 9 Levels
Mechanical Specification
Dimensions (HxWxL) 300 x 200 x 370mm
Weight 15kg Approx