Fluke Networks FQM-SFP-M Fiber QuickMap Kit with SimpliFiber Pro
$4,999.55
Fiber QuickMap Kit with SimpliFiber Pro
Works on multimode fiber, 9/125µm and 62.5/125 µm
850 nm output wavelength. Measure up to 4,921 feet (1,500 metres) of fiber in seconds
Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber
Measure and locate high-loss splices
Locate the end of a fiber
Find potential sources of high bit error rates caused by reflectance from dirty or poor connections
Detects live optical signals before it begins testing
Quick set-up. Connect your fiber and press the Test button. No lengthy set-up necessary
Find problems quickly. Six-second test time—no more blind troubleshooting that can waste hours
Fluke Networks® FQM-SFP-M Fiber QuickMap Kit with SimpliFiber Pro
Works on multimode fiber,
9/125µm and 62.5/125 µm
850 nm output wavelength
Measure up to 4,921 feet (1,500 metres) of fiber in seconds
Locate the end of a fiber
Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber
Measure and locate high-loss splices
Find potential sources of high bit error rates caused by reflectance from dirty or poor connections
Locate Faults beyond the range of a Visual Fault Locator (VFL)
VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. They are not very helpful for cable runs more than a few meters, or when the cable is not visible or accessible, or when the laser light can’t penetrate the jacket.
Optical Time Domain Reflectometers (OTDR) provide graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time and skill to operate.
Fiber OneShot PRO and Fiber QuickMap fill the gap between a VFL and an OTDR. These models have the simplicity of a VFL, and provide distance and power information on high losses, breaks, and the end of the fiber. They also identify live fiber.
Feature Typical VFL Fiber OneShot PRO and Fiber QuickMap Typical OTDR
Illuminates high loss areas ✓
One button operation ✓
✓
Long range
✓
✓
Live fiber detection
✓
✓
Numeric distance display
✓
✓
Numeric reflective loss (dB) display
✓
✓
Graphic display of traces ✓
Trace analysis ✓
Power Meter Options ✓
Data Storage ✓
Data Transfer to PC or Cloud ✓
Cost Low
Low-Medium
High
Applications:
Measure and locate high-loss splices
Measure and locate high loss connections and breaks
Locate the end of a fiber
Find potential sources of high bit error rates caused by reflectance from dirty or poor connections
Detects live optical signals before it begins testing
Features common to both Fiber OneShot PRO and Fiber QuickMap
Quick set-up. Connect your fiber and press the Test button. No lengthy set-up necessary
Find problems quickly. Six-second test time—no more blind troubleshooting that can waste hours
Key information visible on a large display; power loss in db and distance in meters or feet
Set loss and reflection limits
Change the Index of Refraction (IOR) to improve fiber length accuracy
Visible in dark areas. Backlighted display turns off automatically
Removable SC adapter is easily cleaned
Optional LC, ST and FT interchangeable adapters are available
Long battery life, 1,500 tests (typical) from 2 AA alkaline batteries
Rugged construction; vibration and drop tested to 1 meter
When and Where to Use Fiber OneShot PRO and Fiber QuickMap
Fiber OneShot PRO provides immediate and in-depth visibility into a singlemode fiber cable (below).
Fiber QuickMap operates the same, except on multimode fiber up to 1,500 meters / 4,921 feet.
