Epsilon

Fluke Networks CFP2-100-Q/GLD CertiFiber Pro Quad OLTS V2, with Wi-Fi and 1 Year of Gold Support

Fluke Networks CFP2-100-Q/GLD CertiFiber Pro Quad MM and SM OLTS Kit with Wi-Fi Adapter,1-Year Gold Support

Category:

Fluke Networks® CFP2-100-Q/GLD CertiFiber Pro Quad OLTS V2, with Wi-Fi and 1 Year of Gold Support

Automatic pass/fail analysis

Identifies incorrect test procedures

Graphical indication of problem areas

Interchangeable power meter adapters available for all typical connector types (SC, ST, LC and FC)

The Fluke Networks® CertiFiber Pro Optical Loss Test Set (OLTS) helps cabling professionals accomplish more than ever. It’s all about accurate, error-free certification, making jobs easier to manage and certifying fiber optic cabling to industry standards, faster. CertiFiber Pro OLTS complies with all applicable cabling standards, which call out the new Encircled Flux launch condition requirements for optical sources. It’s not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects.

Performance:

Three-second Autotest optical loss measurement of two fibers at two wavelengths with distance measurement and optical loss budget calculation

Provides automatic Pass/Fail analysis to industry standards or custom test limits

Identifies incorrect test procedures resulting in negative loss readings

Double ended Pass/Fail certification of fiber optic connector endfaces

Graphical indication of problem areas on fiber endfaces due to contamination, pits, chips and scratches

Interchangeable power meter adapters available for all typical connector types (SC, ST, LC and FC) to enable the most accurate 1-jumper reference method

Built-in visual fault locator for basic troubleshooting and polarity determination

Dual wavelength measurement capability on a single fiber allows the tester to be used in applications that require only one fiber link

Compliant with TIA-526-14-B and IEC 61280-4-1 Encircled Flux requirements with no additional equipment or procedures

Standards:

Allows combined OLTS Tier 1 (basic), OTDR Tier 2 (extended) certification, end-face inspection and reporting when paired with OptiFiber Pro OTDR

Set reference wizard verifies test reference cords (TRCs) per ISO/IEC 14763-3 and eliminates negative loss errors

Encircled Flux compliant optical launch conditions as required by ANSI/TIA and ISO/IEC standards for testing multimode fiber

Certify fiber optic endfaces to industry standards – IEC 61300-3-35

Detailed View of Fiber Results

View the results of each fiber tested at the same time and the Pass/Fail status on the test results screen. Easily identify the fiber type, test limits, loss and which fiber correlates to each result. All good results are highlighted with a green icon, any faulty events are highlighted with red icons and fibers are identified as output or input to facilitate quick identification and corrective action. The Taptive user interface also makes the results screen a powerful tool with a detailed window which can be touched to drill down and see detailed results.

The screen below shows margin and limit values in the window. Simply tap the screen to drill into specific results as shown in second image.

Reviews

There are no reviews yet.

Be the first to review “Fluke Networks CFP2-100-Q/GLD CertiFiber Pro Quad OLTS V2, with Wi-Fi and 1 Year of Gold Support”

Your email address will not be published. Required fields are marked *