Rigol DHO804 – Digital Oscilloscope (4 Channels / 70MHz)

Description
Rigol DHO804
4 channels / 70MHz bandwidth
12-bit resolution
7″ (1024 x 600) capacitive multi-touch screen
Small footprint – only 10.5″W x 6.4″H x 3.1″D
VESA mounting pattern on rear (100×100)
Digital Oscilloscope (4 Channels / 70MHz)
The DHO800 series is RIGOL’s newest high-performance, economical digital oscilloscope. Though compact in design, it offers superior performance with a capture rate up to 1,000,000 wfms/s (in UltraAcquire Mode), 25 Mpts memory depth, 12 bits resolution, and low noise.
Rigol offers four versions of the DHO800, with two or four analog channels, and 70 or 100MHz bandwidth.
Model Channels Bandwidth
DHO802 2 70MHz
DHO804 4 70MHz
DHO812 2 100MHz
DHO814 4 100MHz
Touch screen gestures
The instrument’s large capacitive touch screen makes operation and configuration easy. Actions supported by the touchscreen controls include tapping, pinching, and stretching, as well as dragging.
Tap
Use one finger to tap the symbol or characters on the screen to perform a variety of functions including selection, navigation, and more
Drag
Use one finger to select the object, and then drag the to a new location
Pinch and stretch
Pinch or stretch two points on the screen with two fingers to zoom in or out
Pinching and stretching horizontally can adjust the horizontal time base of the waveform
Pinching and stretching vertically can adjust the vertical scale of the waveform
Remote control
The DHO800 supports several methods of remote control:
User-defined programming
Program and control the instrument by using the SCPI (Standard Commands for Programmable Instruments) commands
PC software
Use PC software to send commands to control the instrument remotely. RIGOL Ultra Sigma is recommended. Software is available for download from the Rigol website
Web control
Connect the instrument to the network, input the IP address of the instrument into the address bar of the browser of your computer, and the web control interface is displayed
View the display of the real-time interface of the instrument
Migrate device control to the control terminals (e.g. PC, Mobile, iPad, and other smart terminals) to realize remote control of the instrument
User Interface
1. Waveform view 8. Result sidebar
2. Run state 9. Split screen display
3. Horizontal timebase 10. Notification area
4. Sample rate and memory depth 11. Math
5. Horizontal position 12. Channels
6. Trigger 13. Function navigation
7. Function toolbar
Front Panel Overview
1. 7″ capacitive touch screen 9. Trigger controls
2. Multipurpose knobs 10. Horizontal controls
3. Analyze key 11. Vertical controls
4. Measure key 12. Probe compensation signal
Output terminal / ground terminal
5. Cursor key 14. Analog channel input terminals
6. Common tools keys 15. USB host
7. Touch lock key 16. Power key
8. Quick action key (self-defined function)
Rear Panel Overview
1. AUX OUT interface 5. USB type-C power connector
2. LAN port 6. Security lock hole
3. USB device port 7. Ground terminal
4. HDMI connector 8. Mounting screws (VESA 100×100)