Fluke Networks 26000900 PRO3000 Tone and Probe Kit

Fluke Networks® 26000900 PRO3000 Analog Tone and Probe Kit

The PRO 3000 Toner and PRO 3000 Probe helps you identify cables, wires, and wire pairs. You connect the PRO 3000 Toner to a line, then trace and follow the signal with the PRO 3000 Probe.

The PRO3000 Probe has a 3.5 mm monaural earphone jack on its side. When you connect the optional earphone, the speaker is muted and you hear the tones in the earphone. The earphone lets you avoid disturbing people nearby. The PRO3000 toner emits to distinctive tones: constant and alternating.

Pro3000™ Analog Tone and Probe

The Pro3000 Analog Tone and Probe are your best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone™ technology. Angled bed-of-nails clips allow easy access to individual wires, and the RJ11 connector is ideal for use on telephone jacks. The large loud speaker on the probe allows you to hear through drywall, wood or other enclosures to find wires quickly and easily. You can send this loud tone up to 10 miles on most cables! Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

Pro3000 Analog Tone Generator

Use the SmartTone capability of the Pro3000 Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification.

Tone Generator Features:

SmartTone technology

Send tone signal up to 10 miles on most cables

Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters

External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs

Continuity testing

Line polarity confirmation

Pro3000 Analog Probe

The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments.

Probe features:

Loud large speaker amplifies tone through walls, enclosure, wood or plaster

Easy-to-use adjustable volume control dial

“Quick-twist” tip for easy replacement

Free spare tip inside Pro3000 Tone and Probe Kit

Pro 3000f Intellitone Pro MicroMapper TS100 MicroSanner

PoE CIQ-100 DSX-8000

Port Information and Cable ID

PoE Identification ✔ ✔

PoE Power Class (0-8) ✔

Switch Speed ✔ ✔

Digital Toning ✔ ✔ ✔

Analog Toning Noise Filtering ✔ ✔ ✔ ✔ ✔ ✔

Switch Presence ✔ ✔ ✔

VDV Service Detection ✔ ✔

Cable Verification

Cable Wiremap ✔ ✔ Graphical Graphical Graphical

Cable Length ✔ ✔ ✔ ✔

Qualified Cabling Speed (10/100/1000/VoIP) ✔ ✔

Cable Certification

(Cat 6, 6A, 8, Fiber)

✔

Cable Troubleshooting

Indentify open/short ✔ ✔ ✔ ✔ ✔ ✔

Distance to open/short ✔ ✔ ✔ ✔

Locate crosstalk fault ✔

Identify and locate impedance fault ✔