American Medcom Inspector alert V2 multifunctional radiation detector

Product introduction of Medcom Inspector alert V2 multifunctional radiation detector in the United States:
Inspector ALERT V2 multifunctional nuclear radiation detector and surface contamination detector is a high-performance, professional radioactive contaminant detection and evaluation equipment newly launched by the American company MEDCOM [much], which incorporates [much] new manufacturing processes and technologies , the comprehensive performance is superior to similar products, and it is suitable for on-site inspection in nuclear emergency response, hospital X-ray room, customs inspection, and environmental assessment.
Inspector ALERT V2 has made many upgrades based on Inspector ALERT. The core sensor adopts the American Sensor Company (LND) [much] new generation improved high sensitivity, large size (1.77 inches) flat spiral sensor (LND7300). This kind of The sensor has good responsiveness to radiation of different energy intensities, especially for low-intensity and weakly penetrating α and β rays. It can provide good detection efficiency. It is currently the sensor with ideal sensitivity and responsiveness. It can quickly and [Accurately detects the activity, dose rate and pulse count value of α, β, γ and X-rays. The built-in high-speed microprocessor provides powerful and fast data analysis capabilities, ensuring that Inspector USB can provide the ideal stability and accuracy among similar products. At the same time, [much] the new embedded chip technology effectively ensures the long-term working stability of Inspector ALERT V2, optimizes its ability to resist external interference, and can better adapt to the use requirements in various extreme and complex environments.
Inspector ALERT V2 is easy to operate and supports multiple detection modes (real-time dose rate detection, pulse count detection, cumulative count detection). Users can quickly switch working modes through the mode conversion key on the front panel. Supports defined alarm value and self-timed (1 minute to 40 hours) detection function, built-in sound and light alarm function. The shell of Inspector ALERT V2 is made of new high-strength environmentally friendly materials, which is comfortable to hold and provides good protection for internal components. At the same time, its compact shape is also convenient for personal use.
Product features of Medcom Inspector alert V2 multifunctional radiation detector in the United States:
·Four-digit LCD display
·Detect a, B, V and X-rays
·Count measurement, total count measurement and dose rate measurement
·1 minute to 24 hours timing measurement
·V and X-ray: 20kev, B>100kev, a>2Mev, 5.8Cps/Sv/h for Cs-137 source
·Quickly alerts users to the presence of harmful levels of nuclear radiation
· Improve laboratory and field safety
·Automatically compensate for GM tube dead time
·Won’t get stuck in high radiation fields
·CE certified, RoHS compliant and WEEE compliant
US Medcom Inspector alert V2 multifunctional radiation detector application:
·Monitor local radiation leaks and nuclear radiation contamination
·Monitor ammonia radiation in the surrounding environment
·Detecting the radioactivity of building materials such as stone
·Investigate landfills and garbage dumps with nuclear radiation hazards
·Detect X-ray radiation intensity from medical to industrial X-ray instruments
·Detecting radium contamination of groundwater
·Sounding underground drill pipes and equipment for radioactivity
Monitor air and water pollution around nuclear reactors
·Check personal valuables and jewelry for harmful radiation
·Detect radioactivity in porcelain, tableware, glasses, etc.
·Precise positioning of radiation sources
·Inspection of home decoration
American Medcom Inspector alert V2 multifunctional radiation detector product parameters:
·Sensor: Halogen-quenched Geiger-Muller tube. Effective diameter 1.75 inches (45mm). Mica quotient density 1.5-2.0 mg/cm2
·Display: 4-digit LCD display with mode indicator light
·Accuracy: +10% (typical value); maximum +15%
·Alarm: uSv/hr: 0 to 500; mR /hr: 0 to 50: CPM: 0 to 160.000: Buzzer sounds alarm
Anti-saturation: Readings are maintained over a maximum range of 100 times the maximum reading
·Audio: Buzzer sounds every time a radiation event occurs (can be muted)
·Average time period: The display updates every 3 seconds to show the average level over the past 30 seconds. As radiation levels increase, the average period shortens.
·CE certification: Emissions: EN 55011: 98 +A2 (Class B emission limits) EN 61326: 06 (Class B) RF emission immunity: EN 61326: 06 (Annex C) Portable test and measurement equipment EN 61000-4 -2: 95 (ESD): EN 61000-4-3: 97: ROHS compliant, WEEE compliant and ISO9001: 2001 and IS0 14001
·Counting light: red LED flashes every time counting
·Detector: Halogen-quenched Geiger-Stabilizer tube. Effective diameter 1.75 inches (45 chamber meters). Mica window density 1.5-2.0 mg/cm? Can detect Alpha, Beta.Gamma and X-rays
·Efficiency: 4 pi at contact.
·Beta C-14 (up to 49 keV 156 kev): 5.3%Bi-210 (390 kev average 1.2 Mev maximum): 32%Sr-90 (546 kev and 23Mev): 38%P-32 (693 kev average 1.7 MeV (maximum value): 33%
·Alpha Am-241 (5.5 Mev): 18%
·Gamma sensitivity: 3500 CPM/mR/hr, referenced to Cs-137, minimum detectable level of 1-125 on contact is .02 mCi
·Manual: IMl Inspector AlertTMV2 Surface Contamination Meter
·Operating range: USV Hour: .01 to 1,100 mR/hr: .001 to 110 CPM: 0 to 350,000 CPS: 0 to 5.000 Total: 1 to 9,999,000 counts.
·Options: Computer software and cables provided
·port:
Output: 3.5 room meter stereo jack sends counts to computers, data loggers, other CMOS compatible devices, headsets and educational data collection systems. 0-9 V, 1 kOhm impedance.
Input: 2.5mm mono jack provides calibrated input. 0-3.3 V, width>5 s, trigger rising edge.
·Power supply: One AA alkaline battery (9V alkaline battery on some models). At normal background radiation levels at sea level, the average battery life is expected to be over 3500 hours for the AA model and over 2.000 hours for the 9 Vol model. Battery life decreases as radiation levels increase. This instrument (version AA) can be used with an Energizer Ultimate Lithium Cell to extend battery life.
·Dimensions: 150 x 80 x 30 room meters (5.9 inches x 3.2 inches x 1.2 inches)
·Temperature range: -20° to +50°C, -4 to +12°C
·Timer: You can set the sampling time from 1 minute to 40 hours. .
·Weight: 323 g (11.4 mm), including battery