Rigol RSA3045-TG – 4.5 GHz Real-Time Spectrum Analyzer – with Tracking Generator

Description
Rigol RSA3045-TG – 4.5 GHz Real-Time Spectrum Analyzer – with Tracking Generator
4.5 GHz Real-Time Spectrum Analyzer with Tracking Generator
Ultra-Real technology
Displayed average noise level (DANL): <-161 dBm (typical) Phase noise: <-102 dBc/Hz (typical) Level measurement uncertainty: <1.0 dB The RSA3000 real time spectrum analyzer is designed to provide important analysis at each stage of the RF design process, while being flexible enough to adapt to how each engineer works. The unique combination of performance specifications, advanced measurement, real time spectrum visualization, and outstanding Rigol value, make the RSA3000 a powerful instrument for any RF engineer. RSA3000 Front Panel Never Miss a Signal Today's RF designs utilize rapidly changing and pulsing signals that are difficult to consistently capture traditional swept spectrum analyzers. The RIGOL RSA Family delivers a class-leading 7.45 µsec 100% probability of intercept meaning that any pulse with a duration of greater than 7.45 µsec will be captured and accurately displayed. Isolate and Capture IoT Device proliferation means more traffic crowding the available spectrum making identifying and isolating signals of interest critically important. The RSA Family includes advanced trigger capabilities making this task easier. Frequency Mask Trigger captures and displays data when the signal crosses inside or outside of the masked region allowing the engineer to focus on critical signals and ignore interfering ones. Power Trigger allows the engineer to trigger and display only when a power level is exceeded within the real-time span. Trigger Input & Output allow the engineer to time correlate RF events with other system elements to quickly find the root cause of system problems. IF Output recreates the real-time bandwidth on a 430 MHz carrier for further analysis. Visualize and Analyze Complex modulating and pulsing signals require advanced visualization tools to identify patterns and debug designs. The RSA Family provides 7 Real-time Visualization modes to look at signal behavior versus power, frequency and time. 6 markers, 4 trace types, and trace math capabilities allow engineers to quickly analyze and understand signal behavior across the entire span. Display Modes for Real Time Signal The RSA3000 features a variety of different display modes for real-time signals, easily selected using the 10.1" touch screen. Real Time Display Mode: Normal Traditional View of the Real-time Span Familiar View to Swept Spectrum Analyzers Multiple Traces, Cursors for traditional measurements Simple Dataview for initial investigation and monitoring Key parameters: Horizontal - Frequency Vertical - Power Real Time Display Mode: Density Color Map represents signal probability at each frequency and power level See time varying signals within the Real-time span Separate superimposed “hidden” signals Resolution of signals on same frequency bands Key parameters: Horizontal - Frequency Vertical - Power Color - Probability White - Last Trace Real Time Display Mode: Spectrogram Displays multiple captures of the entire span over time Analyze frequency Hopping Patterns Characterize PLL Lock and settle time Identify sources of interference Key parameters: Horizontal - Frequency Vertical - Time Color - Power Real Time Display Mode: PvT Display the RF Power for the Real-time span over a defined time Evaluate the duration of pulsing signals Investigate ASK and other amplitude modulations by monitoring power level changes Determine the timing of pulsing signals Key parameters: Horizontal - Time Vertical - Power Density & Spectrogram PvT & Spectrum PvT & Spectrogram FMT